| |
Produkter |
| |
| |
| |
Aktuellt |
Nya strömtänger från Chauvin Arnoux med automatisk detektering av vilken ty...
Läsarna av tidningen Elektronik i Tyskland har nu utsett Årets produkt 2012...
Nya handhållna oscilloskop från Metrix med galvaniskt isolerade utgångar.
...
|
| |
 Se fler nyheter |
| |
Nyhetsbrev |
|
|
| |
|
|
| |
|
|
|
Schlöder SESD 8800-4 ESD - Verification Set (4 GHz) |
|
| | |
|
|
| |
| |
|
|
| | |
| Klicka på bild för att förstora |
|
|
| |
|
|
| |
| |
Technical data: - Structure: In accordance with IEC 61000-4-2 Ed. 2.0; IEC 77B/574/FDIS, distributed on 2008-09-19
- Measurement resistor 2 ohms target: 2,04 Ohm +/- 2,5%
- Attenuator: Weinschel Model 2, 20dB
- Test lead: Low Loss cable 1m with BNC-connector (Oscilloscope side)
- Deviation of the insert attenuation: +/- 0,3 dB until 1 GHz , +/- 1,0 dB until 4 GHz
Measurement with attenuator and cable - Maximum pulse voltage: 30 kV
- Weight: 1,0 kg
Include:
2 Ohm ESD – target (4 GHz), 20 dB attenuator, Koax cable 1m, Calibration certificate (PTB) with data of the S-parameters in the frequency range up to 4 GHz
|
|
| | |
| |
|
|
ESD - Generators verified according to the standard International Electro technical Commission 61000-4-2. The measurements of the single pulses take place with a special 2 ohm shunt. For the correct verification of the ESD impulses an oscilloscope with a minimum band width of 1 GHz is necessary. The ESD verification set SESD 8800-4 works to 4 GHz and is appropriate for the future normative measurements with a band width of 2 GHz (see newest draft standards)
|
|
|
| |
| |
| |
| |
| |
| |
|
|
| |
| |
| |
|
|
|
|
