HemBänkinstrumentESD instrumentSchlöder SESD230 ESD-simulator 30kV som uppfyller IEC / EN 61000-4-2 standarden

Schlöder SESD230 ESD-simulator 30kV som uppfyller IEC / EN 61000-4-2 standarden

Schlöder SESD230 ESD-simulator 30kV som uppfyller IEC / EN 61000-4-2 standarden
 
Klicka på bild för att förstora
 
 
 
 
 
 
 
 
 

The test generator SESD 230 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depend on the Equipment Under Test (EUT) and the test set-up for laboratory tests the IEC standard shows two test methods:

 

1.) Air discharge

At this method the test generator SESD 200 must be moved to the EUT. The discharge of the high voltage is in the air.

The test voltage can be varied from 500V to 30.000V. The very short rise time of each single pulse generates a wide RF spectrum and interference. 

 

2.) Contact discharge

The discharge electrode with a sharp point is connected to the EUT. The discharge switch is a vacuum relay.

This test method reduces the interference of parameters like approach speed, amplitude, humidity and temperature. Important: If the test tip is not contacted (e.g. varnished or oxidised surfaces) there will be no triggering of impulses. The display shows "NO CONTACT". So we secure a safe discharge at the contact discharge mode. 

 

 

 

Begär offert

 




 

captcha

 

  • Battery or mains operation
  • 30 kV AIR and CON discharge
  • IEC 61000-4-2 (150 pF / 330 Ohm)
  • Predefined tests - Standard and others

 

 

 

 

 
Ladda ner datablad »
 
 
 

Relaterade produkter

Schlöder ESD-Soft 6 Control software for the ESD generator SESD 30000, SESD 230 and SESD 216
The Microsoft-Windows based software controls the ESD generator via a serial interface. All paramete...
Offereras
Schlöder SESD 8800-4 ESD - Verification Set (4 GHz)
ESD - Generators verified according to the standard International Electro technical Commission 61000...
Offereras
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: 0155-26 70 30, Fax: 0155-26 78 30
Leveransadress: Folkungavägen 4, 611 34 Nyköping
E-post: info@instrumentcenter.se