0.03Hz to 3MHz frequency range
Simultaneous display of frequency & amplitude
External seven digit 120MHz counter
High waveform quality at all frequencies & levels
2mV to 20V pk-pk from 50 Ohms or 600 Ohms
Variable symmetry with constant frequency
Auxiliary TTL/CMOS output
1000:1 frequency change by vernier or sweep voltage
Precision internal lin/log sweep
Internal/external AM up to 100%
Exceptional waveform quality
The TG300 series provides very high waveform quality under all conditions.
That means low sinewave distortion, low aberration triangle waves and fast-edged square waves with low overshoot.
Unlike many competitive products good waveform quality is maintained throughout the frequency range and at low output levels.
Variable symmetry for pulse and ramp waveforms
The TG300 series provides bi-directional variable symmetry from 1:9 to 9:1. Unlike some products, frequency is independent of symmetry setting.
Wide range level control
The TG330 provides a main output with a maximum emf of 20V pk-pk from a50Ω or 600Ω source.
An amplitude vernier with a range of 20dB is combined with two switched attenuators of -20dB and -40dB to provide levels down to 2mV pk-pk unterminated.
Variable DC offset of ±10V is available via a centre detent control. An auxiliary output provides a fixed 0V to +5V level suitable for driving both TTL and CMOS loads.
Wide sweep range
Each range can be swept by at least 1000:1 either manually or via the external sweep input.