Produkter

 
 

Aktuellt

PicoConnect 900 Serien - högfrekvensprobar designade för mikrovågs- och gig...
Show news
Världens första och enda handhållna Realtids- spektrumanalysator
Show news
Grattis till vinnaren av Fluke multimetern i vår mässtävling!
Show news
Se fler nyheter   
 

Nyhetsbrev

Skriv in din e-postadress så får du regelbundet nyhetsbrev från oss.
 
 
HemVäxelström ACTångmodellerPEM RCTi AC Current transducers for permanent installation and 5.0Vrms output, 250Arms to 50kArms

PEM RCTi AC Current transducers for permanent installation and 5.0Vrms output, 250Arms to 50kArms

PEM RCTi AC Current transducers for permanent installation and 5.0Vrms output, 250Arms to 50kArms
 
Klicka på bild för att förstora
 
 
 
 
 
 
 
 
 

Specifikationer:

 

Rated current (rms): 250Arms to 50kArms

Rated output (Full scale FS): 5.0Vrms (± 7.07V peak)

Output limit: 150% FS (± 10.6V peak)

Supply voltage (wide input): 12Vdc (-10%) to 24Vdc (+20%)

Maximum input power: 0.4W

Operating temperature range: -5℃ to +65℃ (Integrator electronics), -20℃ to +80℃ (Coil and cable)

Bandwidth (-3dB): (<2000A) 0.6Hz to 1MHz (300mm) 600kHz (700mm)

(>2000A) 0.2Hz to 1MHz (300mm) 600kHz (700mm)

Phase shift @50Hz: (<2000A): 0.9±0.1 degrees

(>2000A): 0.4±0.1 degrees

Accuracy (typ.): ±1.0% of reading

Output load: > 10.0 k ohm

Coil Length: 300mm, 500mm or 700mm (Custom lengths available)

Cable Length (coil to integrator): 1m or 2.5m (Custom lengths available)

 

Standards and Approvals

  • CE marked
  • Complies with EMC EN 61326-1 2006
  • Complies with IEC61010-1:2001 

 

 

 

 

Begär offert

 




 

captcha

 

The RCTi is a current transducer for permanent installation.

Simple to install and easy to retrofit, the Rogowski (sense) coil is thin, lightweight, flexible and clip-around.

 

The secondary output from the transducer is an instantaneous voltage proportional to the measured primary current providing an accurate, low cost, wide-band measurement of the primary current.

 

The RCTi is typically used with power and harmonic meters and analyzers, digital multi-meters, oscilloscopes, data-loggers and data acquisition cards.

  • Traceable calibration (certificate included)
  • No magnetic materials means excellent linearity < 0.1% reading
  • Fully isolated measurement◦Isolated power supply 2kVdc
  • Coil rated at 2kVpeak (withstand test is 4kVrms / 50Hz / 60 sec)
  • Small DIN rail (or panel mount) enclosure - UL94V-0 rated 

 

 

 

 

 
Ladda ner datablad »
 
Ladda ner manual »
 
Ladda ner extra dokument »
 
 
Instrumentcenter Sweden AB, Box 233, 611 25 Nyköping - Sweden. | Tel: 0155-26 70 30, Fax: 0155-26 78 30
Leveransadress: Folkungavägen 4, 611 34 Nyköping
E-post: info@instrumentcenter.se